Update Bios et configuration WSO
Mettre à jour le BIOS de l’Intel NUC
• Vérifier si le BIOS est à jour, dans le cas contraire, télécharger la mise à jour :
• Télécharger le fichier XXX.bio
• Mettre l’update du BIOS sur une clé USB.
• Aller dans le BIOS.
• Ecran « home ».
![Bios1.png 373](https://files.readme.io/7P1kQQQfSUKanmQRyjgp_Bios1.png)
Cliquer sur Update.
Affichage de la fenêtre « Check for BIOS Update » : Cliquer sur "No".
![FlBNldLfS6rQmIeGjJS8_bios2.jpg 1280](https://files.readme.io/c1edb34-FlBNldLfS6rQmIeGjJS8_bios2.jpg)
Récupérer le fichier XX.bio sur la clé USB
![bios3.jpg 1280](https://files.readme.io/pd4qaPRZQuKUBNt7BAXo_bios3.jpg)
Puis confirmer l’update.
![Bios4.jpg 1280](https://files.readme.io/XBrJQkxLTQyjjhQHjxhN_Bios4.jpg)
Paramètrage du BIOS
• Vérifier l’heure du bios ⇒ elle DOIT impérativement être à l'heure UTC/GMT
ex : Pour la France : -1h en hiver et -2h en été.
Cette adresse permet de vérifier l’heure UTC/GMT :
http://www.worldtimeserver.com/heure-exacte-UTC.aspx
• Aller dans « Power » et activer les paramètres comme suit :
• Power Sense : ✓
• Power Failure : Power on
• Wake from S3 via CIR : ✓
• Wake from S4 and S5 via CIR : ✓
• USB S4/S5 Power : ✓
• Wake on USB from S5 : ✓
• PCIe ASPM Support : ✓
![bios5.png 415](https://files.readme.io/Y97TLoiSn2pQj3gqbmui_bios5.png)
• Aller dans Security ⇒ Passwords et configurer le Set Supervisor Password
Puis dans User Access Levels, selectionner "No Access"
![Bios6.png 542](https://files.readme.io/NjeCbfvwQIKGWihlEuOB_Bios6.png)
• Aller dans ⇒ Boot et activer le Legacy Boot ainsi que l'UEFI Boot
![LEGACY.png 873](https://files.readme.io/e59f57e-LEGACY.png)
Après l’installation de la solution neocebox sur l’intel® NUC, vous pouvez désactiver le Boot sur USB. Aller dans l’onglet Boot \ Boot Configuration \ Boot Devices et désactiver USB
![Bios7.png 676](https://files.readme.io/XrIp4NLjQfb0lOE05EN9_Bios7.png)
Updated almost 3 years ago